|
Detailed Specifications:
|
|
|
Top speed and turning rate
The maximum forward speed and turning rate of your Segway PT
can be set at different values based upon which key
is used:
- Beginner Key (black):
Maximum speed: 6 mph (9.6 km/h)
Slower turning rate
- Intermediate Key (yellow):
Maximum speed: 8 mph (12.9 km/h)
Medium turning rate
- Advanced Key (red):
Maximum speed: 12.5 mph (20 km/h)
Most responsive turning rate
|
|
|
Lithium-ion:
15-24 miles (24-39 km) on a single charge
NiMH:
8-12 miles (13-19 km) on a single charge
The range for the i180 varies with type of battery, terrain,
riding style and payload. Under normal riding conditions,
you can expect to ride within the range noted for that battery
type.
|
|
|
Lithium-ion:
14º to 122º F (-10º to 50º C)
NiMH:
32º to 122º F (0º to 50º C)
When stored and charged at room temperature, the i180 can
perform in a wide range of operating environments. Actual
performance is dependent on battery temperature, terrain,
riding style and payload.
|
|
|
The i180's large tires and tall profile make it suitable for
a wide range of applications and terrains. The Segway HT's
inertial sensors constantly monitor the rider's position relative
to gravity. This allows the Segway HT to adjust for changes
in terrain while keeping the rider upright.
|
|
|
Total capacity (rider & cargo): 260 lbs (118 kg)
Rider: 100-250 lbs (45-110 kg)
The Segway PT can carry up to a 250 lb. adult. It can also
be fitted with optional Segway Cargo Accessories for a total capacity
of 260 lbs.
|
|
|
Platform height: 8 in (21 cm)
Footprint: 19 x 25 in (48.3 x 63.5 cm)
Ground Clearance:
Li-ion batteries: 3 in (7.6 cm)
NiMH batteries: 4 in (10 cm)
We designed the Segway PT to take up no more space than the
average person. About as wide as the average person's shoulders,
it raises you 8 inches off the ground, providing a clear sight
line of your surroundings.
|
|
|
83 lbs (38 kg)
Portability was a key design objective. That's why we made
the Segway PT light enough to handle, small enough to store in the
trunk of a midsize sedan, and collapsible enough to fit in
tight storage spaces.
|
|
|
One characteristic of a pedestrian is the ability to turn in
place without impacting any nearby person or object, something
few vehicles can do. By balancing on a single axle, Segway PT
riders can also turn in place.
|
|
|
Lithium-ion (Li-ion) Battery Packs
The i180 is one of the first Segway PTs that comes with optional
Saphion lithium-ion battery packs. The batteries are designed
with on-board electronics that automatically monitor both
the condition and temperature of the batteries. Batteries
can be recharged by utilizing any 90 to 260 volt and 50 to
60 Hz AC outlet (typically accessible in most countries).
A complete cycle charge will take eight to ten hours, which
at 10 cents per KW-h, equates to less than 10 cents of electricity.
Li-ion batteries are designed for approximately 300-500 full
charge/discharge cycles.
Nickel Metal Hydride (NiMH)
Battery Packs
The Segway PT i180 can also be outfitted with two 60 cell
NiMH battery packs. The batteries are designed with on-board
electronics that automatically monitor both the condition
and temperature of the batteries. Batteries can be recharged
by utilizing any 90 to 260 volt and 50 to 60 Hz AC outlet
(typically accessible in most countries). A complete cycle
charge will take four to six hours, which at 10 cents per
KW-h, equates to less than 10 cents of electricity. NiMH batteries
are designed for approximately 300-500 full charge/discharge
cycles.
Range, battery life and recharge times can be affected by
factors such as terrain, temperature, speed of operation,
rider weight and load, proper storage techniques and environmental
conditions.
|
|
|
Redundant electrical systems.
Robust mechanical systems.
Safety is our top priority in both design and operation. To
help ensure that both Segway PT users and those near them remain
safe, we built redundancy into the balancing and electrical
systems. If any system begins operating at diminished capacity,
the other is programmed to assume responsibility. This allows the Segway PT to
maintain balance and bring the rider to a safe stop.
The highest design standards were implemented in building the Segway
PT's mechanical structures, and each part has been thoroughly
tested and analyzed to ensure such high standards were met.
|